TEAC TN-4D-SE
New motor, developed exclusively for direct-drive turntables
The TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.
Knife-edge, pivot-point tonearm bearings
In collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g).
Precision anti-skating and stylus-pressure adjustment
As you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.
Pre-installed Oyster cartridge by SUMIKO
The TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary Japanese cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.
Built-in PHONO EQ amplifier supporting MM cartridges
The TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.
Die-cast aluminium platter
In conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.
Insulating feet with excellent shock absorption
The insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.
2-speed turntable for 33-⅓ and 45 rpm
The TN-4D-SE supports 33-⅓ and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.
Features at a glance
- Direct-drive analog turntable
- Crystal-locked speed stability, thanks to a new brushless DC motor with feedback control
- Die-cast aluminium platter
- Knife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAEC
- Multi-layer piano black or natural walnut veneer finish
- Built-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)
- Audiophile-grade NJM8080 op-amp used in PHONO EQ stage
- 2-speed drive offering 33-⅓ and 45 rpm
- Gold-plated oxidation-resistant output connectors
- Oyster MM cartridge by SUMIKO
- Shock-absorbing insulating feet
- GND terminal
- RoHS compliant
SPECIFICATIONS
| Turntable section | |
| Type | Direct Drive |
| Motor | Brush-less DC Motor |
| Rotation Speeds | 33-⅓ rpm, 45 rpm |
| Wow-and-Flutters | 0.1% |
| S/N Ratio | 67dB or higher (A-weighted, 20kHz LPF) |
| Turntable (Platter) | |
| Material | Aluminium Die-cast |
| Diameter | 30cm |
Tone-arm section | |
| Type | S-shaped, Static-balanced |
| Effective Length | 223mm |
| Needle Pressure Range | 0g to 5.0g |
| Compatible Cartridge Weight | 3.0g to 12.0g 14g to 23g (including Head-shell) |
Head-shell and Cartridge sections | |
| Type | MM-type (SUMIKO Oyster factory installed) |
| Output Voltage | 4.0mV (1kHz) |
| Needle Pressure | 1.5 to 2.5g (appropriate value: 2.3g) |
| Weight | 5.3g |
| Head-shell weight | 11g (including nuts, screws, and wires) |
| Compatible Stylus | Styluses for SUMIKO Oyster |
Analog Outputs | |
| Connector | RCA Pin jack × 1 pair (PHONO/LINE switchable) |
| Output Voltage | |
| PHONO | 4.0mV (1kHz) |
| LINE | 224mV (–13dBV) |
General | |
| Operating Power | AC 100 to 240V, 50/60Hz |
| Power Consumption | 2W |
| Standby Power | 0.5W or less |
| Overall Dimensions (W×H×D) | 420 × 117 × 356 mm / 16.5" × 4.6" × 14.0" |
| Weight | Approx. 6.1kg / 13.5 lbs. |
| Included Accessories | Felt Mat, EP Adapter, Counter Weight, Head-shell (SUMIKO Oyster installed), Platter, Dust Cover, Hinges × 2, RCA Audio cable with GND terminal, AC Adapter (GPE036W-24015), Owner's Manual (including Warranty Card) |