Eversolo DAC-Z10

1990 €

The Eversolo DAC-Z10 is a high-end digital-to-analog converter (DAC) designed for demanding audiophiles, combining technical precision and musicality. It features a fully isolated architecture (FIA), which physically and electrically separates the digital and analog circuits to minimize interference and preserve signal purity.

Equipped with two AKM decoding chips (AK4191 + AK4499EX) per channel, it offers high-resolution conversion up to 32-bit 768kHz PCM and DSD512, ensuring highly refined sound reproduction with low distortion.

The DAC-Z10 also incorporates a high-precision clock system, the Eversolo Precision Core™, combining a temperature-controlled crystal oscillator (OCXO), PLL (phase-locked loop) technology, and FPGA clock reconstruction, ensuring optimal time consistency and reduced jitter.

Its R2R volume control and integrated preamplifier enable analog signal management, while its comprehensive connectivity (USB, XLR, RCA, HDMI ARC/eARC, Bluetooth 5.0) makes it a versatile device, suitable for HiFi systems as well as home theater or headphone setups. With a total harmonic distortion plus noise of only 0.00008% and a dynamic range of 130dB, this DAC is the complete solution for high-fidelity audio enthusiasts.

Fully isolated FIA architecture

The DAC-Z10 is based on Eversolo's fully isolated architecture (FIA), which completely separates the digital and analog sections to minimize interference and preserve signal purity. Three independent linear power supplies individually power the left channel, system, and right channel, allowing each to operate in a very low-noise environment. Its decoding architecture features two independent sets of AK4191 + AK4499 DACs for the left and right channels, combined with a fully balanced analog preamplifier that uses precise dual-channel R2R volume control. This configuration delivers high dynamic range and extremely low THD+N.

Three independent power supplies

With three independent toroidal transformers for the left channel, right channel, and system power supply, the DAC-Z10 maintains ultra-low noise down to 42µV. This design minimizes interference, giving each channel its own clean, isolated voltage supply for stable, detailed sound.

Dual decoding modules

Designed with a fully symmetrical architecture, the DAC-Z10 is equipped with two independent AK4191 + AK4499 DAC modules for the left and right channels. Combined with AKM's Velvet Sound™ technology, it offers a perfect balance between precision and tonal richness. The DAC-Z10 also supports high-resolution files up to PCM 32-bit 768kHz and DSD512.

R2R volume control

The DAC-Z10 uses a precise R2R resistor network for volume control, preserving the original signal at all levels. Whether at low volume or full volume, every nuance remains intact, delivering clear, accurate, and faithful sound.

Fully balanced preamplifier

The Eversolo DAC-Z10 features a high-performance, fully balanced preamplifier with XLR and RCA analog inputs offering up to +10dB of gain. Combined with a precision R2R analog volume control network, it delivers ultra-low noise and distortion, significantly improving dynamic range and signal integrity, allowing every nuance of the music to be reproduced with clarity and authenticity.

Phase-locked loop technology

The DAC-Z10 incorporates an OCXO temperature-controlled quartz oscillator and PLL (Phase-Locked Loop) technology to achieve precise clock reconstruction. Accurate synchronization is fundamental to high-resolution audio reproduction. Thanks to the stability of the OCXO and the precision of the PLL correction, the DAC-Z10 ensures that every note is reproduced exactly as intended.

SPECIFICATIONS

Product Type	DAC / Preamplifier / Headphone Amplifier
Display	8.8” IPS Touchscreen
DAC Architecture	Dual Mono DAC Design
DAC Chips	2 × AK4191 + 2 × AK4499 (one pair per channel)
Audio Processor	Multi-core USB Audio Processor
Op-Amps	OPA1612
Volume Control	Fully Balanced R2R Resistor Ladder
Clock System	OCXO Temperature-Controlled Oscillator + PLL + FPGA Reconstruction
Power Supply	Triple Independent Ultra-Low-Noise Linear Power Supplies
Supported PCM	Up to 32-bit / 768kHz
Supported DSD	Up to DSD512
Bluetooth	Bluetooth 5.0 (SBC / AAC)
Digital Inputs	USB-B, I²S (HDMI), AES/EBU, 2 × Optical, 2 × Coaxial, HDMI ARC
Analog Inputs	XLR Balanced, RCA
Analog Outputs	XLR Balanced, RCA
Headphone Output	6.35mm Single-Ended
Recommended Headphone Impedance	16–300Ω
External Clock Input	10MHz / 25MHz, 50Ω or 75Ω
XLR Output Level	5Vrms
RCA Output Level	2.5Vrms
Signal-to-Noise Ratio (XLR)	130dB
THD+N (XLR)	0.00008%
Control Methods	Touchscreen, Mobile App, IR Remote
Power Supply Input	AC 110–240V, 50/60Hz
Power Consumption	32W
Chassis Material	Aluminium Alloy
Dimensions (W × D × H)	365 × 310 × 88 mm
Weight	7.2 kg