iFi ZEN Phono 3
For record lovers, new and old.
The ZEN Phono 3 redefines what your turntable can do. Its intelligent subsonic filter corrects warped LPs, while an ultra-quiet noise floor and adaptable loading options unlock a new level of clarity from your cartridge.
Super Smart. Super Subsonic.
Standard subsonic filters aren’t intelligent and are typically loathed by audiophiles. They filter not only the bass rumble from warped records but also the bass of the song. Our intelligent subsonic filter knows the difference between the two and only filters the warp, leaving the song completely intact, and without adding group delay.
Your Cartridge. Your Rules.
The ZEN Phono 3 supports four MM/MC gain selections from 36 to 72dB and four input impedance settings. Mix and match gain and loading settings independently of each other with the all-new loading button, ensuring optimum compatibility with a wide range of cartridges and allowing you to get the sound ‘just right’.
Exacting Equalisation.
At the vinyl mastering stage, records are pressed with an inverse RIAA equalisation curve applied. This needs to be undone on playback by the phono stage to reveal the magic of the music. ZEN Phono 3’s RIAA EQ circuitry uses multiple TDK C0G capacitors in parallel. This is for best stability and the least distortion.
This allows for ZEN Phono 3’s RIAA playback equalisation curve to be within +/- 0.15dB tolerance from 20-20kHz, allowing you to hear your records more accurately than ever before.
Specifications
| CHANNEL SEPARATION | >75dB (1kHz all modes) |
| DIMENSIONS | (Length x Width x Height) 158 x 115 x 35mm (6.2” x 4.6” x 1.4”) |
| FREQUENCY RESPONSE | BAL: 20Hz-80kHz (-3dB) SE: 20Hz-20kHz (-0.15dB) |
| GAIN SETTINGS | MM: 36dB MC High: 48dB MC Low: 60dB MC V-Low: 72dB |
| INPUT IMPEDANCE | MM: 47KΩ (100/200pF) MC High: 47kΩ (100/200pF) MC Low: 1k/400/100Ω MC V-Low: 1k/400/100Ω |
| LIMITED WARRANTY | 12 Months* |
| MAXIMUM OUTPUT VOLTAGE | BAL: 100kΩ: ≥19.98V (THD+N <1%), 600Ω: ≥12.75V (THD+N <1%) SE: 100Ω |
| NET WEIGHT | 456g |
| OUTPUT IMPEDANCE | BAL: 200Ω SE: 100Ω |
| POWER CONSUMPTION | No Signal ~1.5W; Max Signal ~1.8W |
| SNR | MM: 91dB(A)/82dB (unweighted 80kHz BW) MC High: 81dB(A)/72dB (unweighted 80kHz BW) MC Low: 89.6dB(A)/80dB (unweighted 80kHz BW) MC V-Low: 78.6dB(A)/69dB (unweighted 80kHz BW) |
| TOTAL HARMONIC DISTORTION | MM: <-91dB/0.0027% MC High: <-80dB/0.0095% MC Low: <-70dB/0.031% MC V-Low: 1k/400/100Ω |
| POWER SUPPLY REQUIREMENT | DC 5V/0.5A (centre positive) |