Farad Super10
Beauty is within and where it matters: your ears
From the fully optimized PCB-Board to the most humble resistor, from the foil output capacitors to the fuse holder, from the active current compensation to the custom wound transformer. All become one in the Super10.You decide as It suits just any application
Pure power, refinement, musicality, micro-detail, imaging, an almost absent noise floor... there is simply no way back from the Super10. Whether used for a Nuc Board, a switch, an output card, a headphone amp, or a DAC, with its maximum power of 10 Amps, the oh-so natural sounding Thermo Magnetic Circuit Breaker and the Furutech FI-09NCF inlet, the super10 will drive anything with ease and grace. The Super10 redefines what a component or set is capable of.Active current compensation
The Super10 incorporates an active current compensation circuit, which corrects for the voltage drop in the output, PCB traces and the cables of the Super10. This reduces the voltage drop at the load when current needs to be delivered, resulting in a rock steady sound on any load.Foil output stage
The Super10 has a 230uF foil capacitor output stage, combining MKS and MKP capacitors for optimal operation and ultimate sound quality. Because no electrolytic capacitors are used, ESR is very low and Hf filtering very high. Result is a pitch-black background and ultimate speed delivery of voltage peaks over the full bandwidth. Very good for analog audio, but especially great for driving digital equipment.TMCB & FI-09 NCF Inlet
The Super10 is standard fitted with a thermal magnetic circuit braker. Soundwise superior to about any conventional fuse we have heard, even the very expansive ones! The sound is as seductive as addictive, redefines 'natural' and 'flow' in an endless soundstage. Hearing is believing. It didn't take long to decide the world renowned Furutech FI-09 NCF Inlet would be the inlet of choice for the Super10. With its mechanical and electrical stability, low noise floor, detailed sound, and ultra stable image the FI-09 NCF and Super10 are just natural partners.Shielded tranformer & Choke
To eliminate even the most minute hum, buzz or negative influence from the magnetic field of the custom wound transformer and choke, we have potted and shielded these to ensure a dead quit operation and completely undisturbed de output.SPECIFICATIONS
| Max output current | 10A |
| Size (W x D x H) mm | 260 x 320 x 70 |
| Weight | 7.8 kg |
| Sound quality | +++ |
| Input voltage Vac ** | 100, 115, 127 and 230 |
| DC output voltage ** | 5V – 24V |
| Capacitance* | 4.5F – 16.7F |
| Output connector | GX25-4 |
| Suitable cables | L2-C + L2-S + L3-C + L3-S |
| AC input | Furutech FI-09 NCF |
| Microprocessor protection | Yes |
| Earth connection | Yes |
| Ground lift | Yes |
| Trigger input / standby | Yes |
| Cable compensation | Yes |
| Feet | carbon/maple |
| Chassis damping | maple |
| Device protection | TMCB |
| Shielding transfomer | 4-fold |
| Potted transformer | Yes |
| Gold plated PCB | Yes |
| pi-filter choke | Nano-crystalline potted |
| Output stage | MKS/MKS |
| Parallel stabilisators | 6 |
* Depending on output voltage
** Factory set