Tsakiridis Artemis Ultima

5140 €

Įdėti į krepšelį

Artemis Ultima is a power amplifier in dual-mono configuration. It’s design is a push-pull configuration implementing 2 power tubes per channel in class AB1 operation.

All electronic components are through hole type silver soldered by hand. Artemis Ultima utilizes our top of the line 16 layer handmade output transformers with high quality core for superior sound quality.

The push – pull configuration of Artemis Ultima draws enough power from the output tubes to drive a wide range of loudspeakers. Gold plated RCA connectors are implemented for the signal input and WBT-710 Next Gen binding posts for the loudspeakers.

Carefully selected values and types of the electronic components contribute to the reliable circuits operation and the high sound quality of the amplifier. Metal film power resistors and Mundorf Supreme silver gold oil signal capacitors are used in Artemis Ultima. The meticulous PCB design ensures excellent behavior in SNR, distortion and channel separation.

Inner signal wiring with high quality shielded signal cable. Power wiring uses high quality copper cables of more-than-needed AWG gauge, to achieve low impedance power transfer. All power cables are twisted in pairs to minimize the electromagnetic interference.

The handmade 16 layer output transformers with high quality copper wire and core material enable the amplifier to reveal an excellent sound stage and the slightest music details through the entire audio spectrum to give you a unique audio experience.

Made by us and tested thoroughly for quality and reliability. The same applies to the power transformer. The positioning of the transformers is such that minimizes the magnetic coupling between power and output transformers.

FEATURES & SPECS

Inputs	1 line input
Input/Output connectors	RCA gold plated
Speaker connectors	WBT-0710 Next Gen
Power supply capacitors	United Chemicon 105 °C
Signal capacitors	Mundorf Supreme Silver Gold Oil capacitors
Power resistors	Metal film 5% tolerance
Low power resistors	Metal film 1% tolerance
Power transformer	Handmade 400 W
Output transformer	Handmade 16-layer 6N copper, high-quality core
Driving stage tubes	Premium quality 4 × 12AT7
Power tubes	4 × KT150
Output Power	2 × 70 W
Input impedance	100 kΩ
Output impedance	6 Ω
Input sensitivity	350 mV
Signal to Noise Ratio (SNR)	88 dB
Channel separation	68 dB
Rise time	4 µs @ 10 kHz
Harmonic distortion	10 W @ 1 kHz → 0.35%
Frequency response	–3 dB, 3 Hz – 84,000 Hz
Power supply energy	200 Joule
Power consumption	220 W
Weight	23 kg
Dimensions (W × D × H)	29 × 46 × 23 cm

Krepšelis

Log in