Tsakiridis Hermes

1800 €

Įdėti į krepšelį

Hermes amplifier is an Integrated amplifier with 3 inputs. It’s design is a double push-pull configuration implementing 4 EL84 power tubes per channel in class AB1 operation self-biasing and dual-mono power supply.

All electronic components are through hole type soldered by hand. Hermes amplifier utilizes 8 layer handmade output transformers for superb sound quality.

Hermes uses the EL84 tube which is widely acknowledged for its full and high quality sound. Arranged in a double push-pull configuration to obtain enough power to drive a wide range of loudspeakers. The self biasing circuit is a nice convenience for the user.

Gold plated RCA connectors are implemented for the signal inputs/output and high quality binding posts for the loudspeakers. For the volume control the classic blue Alps is used. An elegant remote control in aluminum case offers you control over all the functions of Hermes integrated amplifier. Volume control, input selection and mute.

Carefully selected values and types of the electronic components contribute to the reliable circuits operation and the high sound quality of the amplifier. The meticulous PCB design ensures excellent behavior in SNR, distortion and channel separation.

Inner signal wiring with high quality shielded signal cable. Power wiring uses high quality copper cables of more-than-needed AWG gauge, to achieve low impedance power transfer. All power cables are twisted in pairs to minimize the electromagnetic interference.

The handmade multilayer output transformers allow the amplifier to reveal the sound stage and all the music details through the entire audio spectrum.

Made by us and tested thoroughly for quality and reliability. The same applies to the power transformer. The positioning of the transformers is such that minimizes the magnetic coupling between power and output transformers.

FEATURES & SPECS

Inputs	3 line inputs
Input selection	High grade signal relays
Input/Output connectors	RCA gold plated
Speaker connectors	Ultimax
Remote control	Yes
Volume control	Blue Alps
Power supply capacitors	United Chemicon 105 °C
Signal capacitors	Non-inductive polypropylene film capacitors
Power resistors	Carbon film 5% tolerance
Low power resistors	Metal film 1% tolerance
Power transformer	Handmade 250 W
Output transformer	Handmade 8-layer windings
Driving stage tubes	1 × 12AU7 and 2 × 12AT7
Power tubes	8 × EL84
Output Power	2 × 25 W
Input impedance	47 kΩ
Output impedance	6 Ω
Input sensitivity	350 mV
Signal to Noise Ratio (SNR)	84 dB
Channel separation	67 dB
Rise time	6 µs @ 10 kHz
Harmonic distortion	10 W @ 1 kHz → 0.48%
Frequency response	–3 dB, 10 Hz – 47,000 Hz
Power supply energy	80 Joule
Power consumption	90 W
Weight	14 kg
Dimensions (W × D × H)	29 × 44 × 22 cm

Krepšelis

Log in