Tsakiridis Theseus

2100 €

Įdėti į krepšelį

Theseus amplifier is an Integrated amplifier with 3 line inputs a phono input and a USB DAC input. It’s design is a single ended class A capable of utilizing many types of pentode power tubes power tubes (from EL34 to KT170) and dual-mono power supply. All electronic components are through hole type soldered by hand. Theseus amplifier utilizes 8 layer handmade output transformers for superb sound quality.

A class A integrated tube amplifier which gives a superior sound quality foe pure audio lovers. As a class A amplifier Theseus requires high sensitivity loudspeakers to unfold its virtues. Theseus provides an MM tube phono stage, three line inputs and a USB DAC.

Gold plated RCA connectors are implemented for the signal inputs/output and high quality binding posts for the loudspeakers. For the volume control the classic blue Alps is used.

An elegant remote control in aluminum case offers you control over all the functions of Theseus integrated amplifier. Volume control, input selection and mute.

Carefully selected values and types of the electronic components contribute to the reliable circuits operation and the high sound quality of the amplifier. The meticulous PCB design ensures excellent behavior in SNR, distortion and channel separation.

Inner signal wiring with high quality shielded signal cable. Power wiring uses high quality copper cables of more-than-needed AWG gauge, to achieve low impedance power transfer. All power cables are twisted in pairs to minimize the electromagnetic interference.

The handmade multilayer output transformers allow the amplifier to reveal the sound stage and all the music details through the entire audio spectrum to give you a unique audio experience. Made by us and tested thoroughly for quality and reliability. The same applies to the power transformer and the chokes.

The positioning of the transformers and chokes is such that minimizes the magnetic coupling between power and output transformers.

FEATURES & SPECS

Inputs	3 line inputs
Phono input	MM cartridge
Outputs	1 Tape output
Other connections	1 USB DAC input
Input selection	High grade signal relays
Input/Output connectors	RCA gold plated
Speaker connectors	Ultimax
Remote control	Yes
Volume control	Blue Alps
Power supply capacitors	United Chemicon 105 °C
Signal capacitors	Non-inductive polypropylene film capacitors
Power resistors	Carbon film 5% tolerance
Low power resistors	Metal film 1% tolerance
Power transformer	Handmade 400 W
Output transformer	Handmade 8-layer windings
Driving stage tubes	2 × 12AU7
Phono stage tubes	2 × 12AX7
Power tubes	2 × EL34 up to 2 × KT170
Output Power	2 × 10 W (EL34) up to 2 × 30 W (KT170)
Input impedance	100 kΩ
Output impedance	6 Ω
Input sensitivity	350 mV
Signal to Noise Ratio (SNR)	86 dB
Channel separation	64 dB
Rise time	6 µs @ 10 kHz
Harmonic distortion	10 W @ 1 kHz → 1.20%
Frequency response	–3 dB, 10 Hz – 47,000 Hz
Power supply energy	100 Joule
Power consumption	300 W
Weight	20 kg
Dimensions (W × D × H)	46 × 36 × 23 cm

Krepšelis

Log in